Engine Brace Kit $250.00 *Free shipping to all 48
This kit includes (1) Fitzgerald Motorsports Engine Brace made out of 6061
Aluminum, a set of (4) ARP racing studs, washers, nuts and (1) new gasket
with punched out holes to accommodate the brace.
This kit includes (1) Fitzgerald Motorsports Engine Brace made out of 6061
Aluminum, a set of (4) ARP racing studs, washers, nuts and (1) new gasket
with punched out holes to accommodate the brace.
| Friends of Fitzgerald Motorsports |
Machine Stock Case to 1250cc $675.00
*Does not include shipping charges.
Machine your 1130cc case to 1250cc print specifications.
*Does not include shipping charges.
Machine your 1130cc case to 1250cc print specifications.
Machine Stock Case to 4.25 Bore $750.00
*Does not include shipping charges.
Machine your 1130cc or 1250cc case to 4.25 diameter for Wiseco Sleeve.
*Does not include shipping charges.
Machine your 1130cc or 1250cc case to 4.25 diameter for Wiseco Sleeve.
26 Tooth Steel Pulley $280.00
*Free shipping to all 48! These pulleys are made out of high strength
pre-heat treated steel...once machined they are heat treated to a mind
blowing 48 Rockwell hardness. We make them in two styles. Standard
(180-200 rear tire) and Offset (240-260 rear tire).
*Free shipping to all 48! These pulleys are made out of high strength
pre-heat treated steel...once machined they are heat treated to a mind
blowing 48 Rockwell hardness. We make them in two styles. Standard
(180-200 rear tire) and Offset (240-260 rear tire).
58mm Throttle Body and Velocity Stacks $300.00
*Free shipping to all 48! We take your stock throttle body...remove the stock
butterflies, bore the body out to 58mm and make new custom fit butterflies to
fit just like the originals. We also offer precision boring of your plastic stock
velocity stakes accordingly.
*Free shipping to all 48! We take your stock throttle body...remove the stock
butterflies, bore the body out to 58mm and make new custom fit butterflies to
fit just like the originals. We also offer precision boring of your plastic stock
velocity stakes accordingly.
Slotting of Stock Sprokets $60.00 *Free shipping to all 48!
This is needed when you do a cam change, so that you can achieve proper
degree-ing of the cames to achieve maximum performance. Core
replacement is needed. We carry them in stock and once we receive your
cores in the mail we will ship our machined ones to you within one day.
This is needed when you do a cam change, so that you can achieve proper
degree-ing of the cames to achieve maximum performance. Core
replacement is needed. We carry them in stock and once we receive your
cores in the mail we will ship our machined ones to you within one day.
Pinning of Main Bearings $75.00
*Does not include shipping charges
This is another HIGHLY recommended upgrade to any big bore or high
performance motor. Bearings will need to be supplied.
*Does not include shipping charges
This is another HIGHLY recommended upgrade to any big bore or high
performance motor. Bearings will need to be supplied.
Custom Billet Aluminum Wheels $Call For Quote
With our state of the art Hurco CNC and CAD/CAM software we can create
and machine just about any design in a solid piece of 606I aircraft grade
aluminum wheel blank.
With our state of the art Hurco CNC and CAD/CAM software we can create
and machine just about any design in a solid piece of 606I aircraft grade
aluminum wheel blank.
Custom Rear Sprokets $200.00*Free shipping to all 48
We take your stock rear sprocket and machine it for a one off look. Powder
coating available for extra custom designs or colors.
We take your stock rear sprocket and machine it for a one off look. Powder
coating available for extra custom designs or colors.
| Fitzgerald Motorsports is proud to announce that we are authorized dealer for the following companies. Please feel free to contact us for pricing! |
| From there killer exhaust systems to Straight Cut 2nd gear sets, VH Motorsports has it all. We have package deals available contact us with part numbers for blazing fast service. |
| If you demand the best bang for your buck, then the buck stops here. CP Pistons manufactures some of the nicest piston sets on the market. From in-stock shelf items to custom one of designs, most applications available from 1130-1318cc. |
| The industry leader in re-weld and full billet cranks for V-Rods. Both types of cranks are available in three different strokes 1/4, 3/8, and 1/2. Balancing, knife edging, and cyro services also available. |
| Manufacturer of superior connecting rods from stock length to just about any length you desire is available, contact us with your request today! |
| Industry leader of high tensile strength engine studs, washer, and nuts. If you are looking to upgrade your head or case studs, then your search is over. Package sets available contact us with your needs. |
| DIAMOND HEADS LLC. the king's of bling! |
| If you want to for sure stand out of the pack then Diamond Head cutting is for you. One look at someone's bike with this treatment and enough is said! Pictures do not do this service justice. Contact us for pricing for any style of V-Twin heads. |
| Brown's Plating Service located in Paducah, KY has been the motorcycles industry leader in custom chrome plating since 1968. There end product speaks volume, no one in the country can do what Brown's does. Email us with your request for chrome today! |
| Megacycle Cams specializes in re manufactured and solid billet cams. With over 30 years in the motorcycle industry. Delivery and quality of product is second to no one. With over 20 special profiles for the V Rod alone should tell you something. Contact us for pricing, cores are required for re maned cams. Delivery is the fastest in the industry! |
Side Mount License Plate Holder
Powder Coated $250.00
Chrome $325.00 *Free shipping to all 48.
This side mount was designed, machined and
assembled in house. It is made out 6061 aluminum plate
and machined in our CNC. LED board was also made in
the USA by Heavycycle in California. Contact us we have
both vertical and horizontal mounts available. These
mounts can and will work on other bikes.
Powder Coated $250.00
Chrome $325.00 *Free shipping to all 48.
This side mount was designed, machined and
assembled in house. It is made out 6061 aluminum plate
and machined in our CNC. LED board was also made in
the USA by Heavycycle in California. Contact us we have
both vertical and horizontal mounts available. These
mounts can and will work on other bikes.
VRSCA Drag Bar
Powder Coated $200.00
Chrome $280.00 *Free shipping to all 48.
Modify your stock "A" bar by chopping, aligning and
re-welding them. Once completed we send them out to
have them powder coat or chromed. Cores are
required. Contact us we have more pictures available
for viewing.
Powder Coated $200.00
Chrome $280.00 *Free shipping to all 48.
Modify your stock "A" bar by chopping, aligning and
re-welding them. Once completed we send them out to
have them powder coat or chromed. Cores are
required. Contact us we have more pictures available
for viewing.